OEM Hyundai Air Cleaner Assemblies

Replacing Air Cleaner Assemblies in Your Hyundai

The purity of the air entering your engine is the most significant factor in its long-term health and throttle response. For owners of the adventure-ready Hyundai Santa Fe, the air cleaner assembly serves as the first line of defense against dust, moisture, and road debris. A cracked air cleaner housing can allow unfiltered air to bypass the filter, leading to abrasive wear on your cylinder walls.

Quick Steps to Replace Your Air Cleaner Assembly

1. Identify All Mounting Points

Locate the bolts and plastic clips that secure the air cleaner assembly to the vehicle’s frame.

2. Unplug Electronic Sensors

Carefully depress the locking tabs on the MAF sensor and any air temperature sensors before removing the intake duct.

3. Loosen Intake Clamps

Use a screwdriver or socket to loosen the metal clamps that connect the air cleaner box to the throttle body hose.

4. Extract the Old Housing

Gently lift the assembly out of the engine bay, taking care not to damage the nearby wiring or cooling hoses. To ensure your engine remains perfectly balanced, make sure to inspect your motor mounts to prevent excessive vibration from cracking the plastic intake ducting.

5. Seat the New Genuine Unit

Position the fresh OEM Hyundai housing onto the mounting grommets.

6. Reconnect and Verify

Secure the intake duct and sensors, start the engine, and check for any hissing sounds indicating a vacuum leak.

Find the genuine air cleaner assembly parts you need for your exact Hyundai model. Need assistance? Contact our team at Hyundai Wholesale Direct today.